|iPV3-Li 165 Watt MOD with Temp Control by Pioneer4you Greenleaf
The IPV3-LI V2 Box Mod by Pioneer4You is the newest version and most updated version of the famous IPV3 Mod. The Pioneer4You IPV3-LI V2 Box Mod packs a major punch, allowing you to go up to 165 watts and fire atomizers as low as .10 ohms! Not to mention the new IPV3-LI V2 Mod features Temperature Control and a Magnetic back cover allowing you to simply change your batteries with no hassle. The Pioneer4You IPV3-LI V2 Mod is controlled and upgradeable box mod with a 510 atomizer connector, it will come out of the box with 165W and will be upgradeable to 200W. The IPV3's Billet Aluminum body features room to use (2) 18650 Flat Top Batteries, which will increase your voltage times two.
The IPV3-LI V2 box mod allows you to control wattage, for better consistency and repeatability. The Pioneer4You IPV3-LI is equipped with the new SX330-V3SL chip, the chip features Temp Control and gives you the ability to upgrade your firmware to increase the IPV3-LI's watts for future developments. The Pioneer4You IPV3-LI V2 Mod features a OLED display screen so you can see your IPV's wattage, Temperature Control, voltage, battery life, etc. Don't miss out on the IPV3-LI V2, this is the ultimate box mod!
This is an advanced mod for advanced users only. Please be aware that this mod requires knowledge of battery safety and technical know-how to work properly.
Update 6/27/2015: A firmware update is now available through the manufacturer's website.
New SXi upgrade package
iPV3 Li 200watt upgrade software with Ti01 and Nickel 200 TC
Warning: We have not tested any of the manufacturer's software. Download and install at your own risk. Myvaporstore.com will not assume responsibility for any damage to your computer or device this software may cause. Always perform a virus and malware scan on any executable programs before running and installing them.
- Titanium coil compatibility
- Increased wattage from 165w to 200w
Features and Specs:
Please note: Temperature control requires the use of nickel coils.
- Dimensions: 4-1/8"L x 2-1/2"W x 7/8"
- 510 Threaded
- Wattage: 7w - 165w
- Atomizer Resistance: 0.10ohm - 3.0ohm
- Improved Firing Button
- Aluminum Body
- Yihi temperature control chipset
- Redesigned internals
- Takes two 18650 batteries in series (not included)
- Yihi SX330-V3Si Upgradeable chip
- 165 watts upgradeable to 200 watts with a later firmware update
- Touch sensor functionality has returned
- No direct charging capability