Picture of Zmax V2
Zmax V2
The ZMAX takes vaping to the next level. This is really a variable power mod because you have the option of adjusting either your voltage or your power (watts). The ZMAX adjusts from 3.0 to 6.0 Volts in 0.1 volt increments or 3.0 to 15 Watts in 0.5 Watt increments. The ZMAX is available in a chrome polished finish or a brushed stainless finish. Maximum output of 4 Amps Blue LED Dimensions: 4.9"L x 0.8"D The ZMAX can read your output voltage, battery voltage and cartomizer / atomizer resistance. This APV does it all. In addition, the ZMAX has a native eGo style connector that allows you to use both 510 and Joye eGo cartomizers, atomizers and tanks without adapters. The eGo style connector does not have outside threads but typical eGo style parts fit flush down into the recess that is around the ZMAX connector. 510 Tanks and other similar 510 items will screw in and be almost flush with the top. The ZMAX will accept a Flat Top or Button Top 18650 battery with the maximum dimension of 66mm x 18mm. The ZMAX should only be used with IMR LiMn batteries. This device is not compatible with protected batteries.
*
$19.99

Picture of Zmax V2 Mini
Zmax V2 Mini
The Stainless ZMAX MINI Rev.2 Advanced Personal Vaporizer by Smoktech is small-sized, but powerful. The Zmax Mini is reliable, full featured and very well built. With this version, Voltage or Wattage is variable: adjust between 3.0V-6.0V or 3.0W-15.0W, using a single 18350 IMR battery. Check atomizer resistance and battery voltage too! The Rev. 2 Zmax has one extra menu item (see number 8 below), which enables you to switch between RMS and mean value voltage monitoring. The RMS mode is more accurate, because it samples the output Voltage repeatedly while it is powering an atomizer. It is with these measurements that the Zmax Mini is able to adjust for heat-related Voltage drift. With its 4 Amp output, the Zmax Mini is sure to rock whatever device you want to run on it! This version has a blue button and blue LED display that can be turned off. The Zmax has a native 510 connection, so it will run 510-threaded clearomizers without an issue. To use eGo-threaded clearomizers like the Kanger T2, T3 & EVOD, you will need an eGo adapter. Run 808 devices as well, with a 510-808 adapter. The Zmax Mini requires one 18350 IMR battery, It will work with flat OR button top IMR's. Never use non-rechargeable batteries in this or any other e-cig device! Only use the recommended batteries for this unit, it's for your safety.
*
$9.99